Supplement to ACATR EDS19991203DDC02
2001-08-22

DDC-I A/S (the client) hereby requests that the Ada Conformity Assessment Authority 
(ACAA) extend the certified status documented in the above-referenced Ada Conformity 
Assessment Test Report (ACATR) and in Ada Conformity Assessment Certificate 
(ACAC) A000118E2.2-004 to the implementation class(es) described in the following 
pages.

Technical Contact: 	Jesper Jorgensen
	Gl. Lundtoftevej 1B
	DK-2800 Lyngby
	Denmark
	jj@ddci.dk

Approval:	______________________________ 	________________
	Ada Conformity Assessment Authority 	Date

Implementation Class Information


Implementation Class Category:	Maintenance
Processor Identification:	DDC-I SCORE Sun/Solaris Ada Compiler System, 
                                Version 2.2 for 80x86
Host Systems:	  Sun SPARC running Solaris 2.5.1 or later
Target Systems:	  Intel 80386 or later (including compatibles)
Representative Processor and Configuration Tested:
Host System:	  UltraSPARC5 running Solaris 2.7
Target System:	  Acer Acros Pentium 3, 166MHz (bare)
ACATS Version Used for Testing Representative Processor:
                  ACATS 2.4 (VCS label A2_4D)


Client Certification of Testing and Processor Derivation:
I, the undersigned, representing the Client, certify that the above identified 
representative processor was tested on the described configuration with the customized 
ACATS version described above, including the code modifications and implementation-
defined substitution values that were used in the conformity assessment leading to the 
certificate named in this Supplement, with modifications described in this Supplement, 
and that the testing results were the same as those obtained in that conformity 
assessment, with exceptions as described in this Supplement. I further declare that the 
Client knows of no deliberate deviations from the Ada language standard 
(ANSI/ISO/IEC 8652:1995) as corrected by Technical Corrigendum 1 (ISO/IEC 
8652:1995/Cor.1:2001) in the identified representative processor above. I further certify 
that the above-identified representative processor and configuration meets the definition 
of base, maintained, or rehosted implementation (as described in the Operating 
Procedures for Ada Conformity Assessment).

________________________________	________________
	Erik Jensen	 Date

Maintenance Changes:
Various corrective and perfective changes has been performed with the most 
significant for the ACATS being:
? Corrections to meet Technical Corrigendum 1 of the Ada Reference 
Manual,
? Improvements of a number of error messages.

ACATS Modifications:
Apart from the ACAA changes to ACATS from version 2.2H to 2.4D, the following 
modification was made:
? In the support file macro.dfs the macro FIELD_LAST was changed from 
the value 255 to 511. This change affects only a single test: ce3002c.

The following allowable modifications in ACATS 2.4 (VCS label A2_4D) were 
used:
	c490001
	c490002
 (See ACATR EDS19991203DDC02-2.2 for the allowable modifications used in 
the original assessment.)

Test Results Differences:
There are no test result differences except the obvious ones:
? Test results for tests that have been added to ACATS,
? The ACATS version number printed on execution logs,
? Changed error message wordings.
Of the tests added to the suite between ACATS 2.2 (VCS label A2_2H) and ACATS 
2.4 (VCS label A2_4D), none were graded as inapplicable or unsupported.

ACAL Review:
The Electronic Data Systems (EDS) Ada Conformity Assessment Laboratory 
reviewed the results submitted by DDC-I A/S, as described in this Supplement, 
and has confirmed that all test results submitted are equivalent to those 
produced by the reference processor.

	
Ada Conformity Assessment Laboratory
Phil Brashear
Eds Conformance Testing Center
4646 Needmore Road, Bin 46
P.O. Box 24593
Dayton OH 45424-0593
U.S.A