Ada Reference ManualLegal Information
Contents   Index   References   Search   Previous   Next 

13.3 Operational and Representation Attributes

1/1
The values of certain implementation-dependent characteristics can be obtained by interrogating appropriate operational or representation attributes. Some of these attributes are specifiable via an attribute_definition_clause.

Syntax

2
attribute_definition_clause ::= 
      for local_name'attribute_designator use expression;
    | for local_name'attribute_designator use name;

Name Resolution Rules

3
For an attribute_definition_clause that specifies an attribute that denotes a value, the form with an expression shall be used. Otherwise, the form with a name shall be used.
4
For an attribute_definition_clause that specifies an attribute that denotes a value or an object, the expected type for the expression or name is that of the attribute. For an attribute_definition_clause that specifies an attribute that denotes a subprogram, the expected profile for the name is the profile required for the attribute. For an attribute_definition_clause that specifies an attribute that denotes some other kind of entity, the name shall resolve to denote an entity of the appropriate kind. 

Legality Rules

5/1
An attribute_designator is allowed in an attribute_definition_clause only if this International Standard explicitly allows it, or for an implementation-defined attribute if the implementation allows it. Each specifiable attribute constitutes an operational aspect or aspect of representation. 
6
For an attribute_definition_clause that specifies an attribute that denotes a subprogram, the profile shall be mode conformant with the one required for the attribute, and the convention shall be Ada. Additional requirements are defined for particular attributes.

Static Semantics

7/2
A Size clause is an attribute_definition_clause whose attribute_designator is Size. Similar definitions apply to the other specifiable attributes.
8
A storage element is an addressable element of storage in the machine. A word is the largest amount of storage that can be conveniently and efficiently manipulated by the hardware, given the implementation's run-time model. A word consists of an integral number of storage elements.
8.1/2
  A machine scalar is an amount of storage that can be conveniently and efficiently loaded, stored, or operated upon by the hardware. Machine scalars consist of an integral number of storage elements. The set of machine scalars is implementation defined, but must include at least the storage element and the word. Machine scalars are used to interpret component_clauses when the nondefault bit ordering applies. 
9/1
The following representation attributes are defined: Address, Alignment, Size, Storage_Size, and Component_Size.
10/1
 For a prefix X that denotes an object, program unit, or label: 
11
X'Address
Denotes the address of the first of the storage elements allocated to X. For a program unit or label, this value refers to the machine code associated with the corresponding body or statement. The value of this attribute is of type System.Address. 
12
Address may be specified for stand-alone objects and for program units via an attribute_definition_clause.

Erroneous Execution

13
If an Address is specified, it is the programmer's responsibility to ensure that the address is valid; otherwise, program execution is erroneous. 

Implementation Advice

14
For an array X, X'Address should point at the first component of the array, and not at the array bounds. 
15
The recommended level of support for the Address attribute is: 
16
17
18/2
19
NOTES
20
1  The specification of a link name in a pragma Export (see B.1) for a subprogram or object is an alternative to explicit specification of its link-time address, allowing a link-time directive to place the subprogram or object within memory.
21
2  The rules for the Size attribute imply, for an aliased object X, that if X'Size = Storage_Unit, then X'Address points at a storage element containing all of the bits of X, and only the bits of X. 

Static Semantics

22/2
 For a prefix X that denotes an object: 
23/2
 X'Alignment
The value of this attribute is of type universal_integer, and nonnegative; zero means that the object is not necessarily aligned on a storage element boundary. If X'Alignment is not zero, then X is aligned on a storage unit boundary and X'Address is an integral multiple of X'Alignment (that is, the Address modulo the Alignment is zero).
24/2
 This paragraph was deleted.
25/2
Alignment may be specified for stand-alone objects via an attribute_definition_clause; the expression of such a clause shall be static, and its value nonnegative.
26/2
 This paragraph was deleted.
26.1/2
   For every subtype S: 
26.2/2
   S'Alignment

The value of this attribute is of type universal_integer, and nonnegative.
26.3/2
For an object X of subtype S, if S'Alignment is not zero, then X'Alignment is a nonzero integral multiple of S'Alignment unless specified otherwise by a representation item.
26.4/2
Alignment may be specified for first subtypes via an attribute_definition_clause; the expression of such a clause shall be static, and its value nonnegative.

Erroneous Execution

27
Program execution is erroneous if an Address clause is given that conflicts with the Alignment. 
28/2
 For an object that is not allocated under control of the implementation, execution is erroneous if the object is not aligned according to its Alignment.

Implementation Advice

29
The recommended level of support for the Alignment attribute for subtypes is: 
30/2
31/2
32/2
32.1/2
33
The recommended level of support for the Alignment attribute for objects is: 
34/2
35
35.1/2
35.2/2
NOTES
36
3  Alignment is a subtype-specific attribute.
37/2
This paragraph was deleted.
38
4  A component_clause, Component_Size clause, or a pragma Pack can override a specified Alignment. 

Static Semantics

39/1
 For a prefix X that denotes an object: 
40
X'Size
Denotes the size in bits of the representation of the object. The value of this attribute is of the type universal_integer
41
Size may be specified for stand-alone objects via an attribute_definition_clause; the expression of such a clause shall be static and its value nonnegative.

Implementation Advice

41.1/2
   The size of an array object should not include its bounds. 
42/2
 The recommended level of support for the Size attribute of objects is the same as for subtypes (see below), except that only a confirming Size clause need be supported for an aliased elementary object. 
43/2

Static Semantics

44
For every subtype S:
45
S'Size
If S is definite, denotes the size (in bits) that the implementation would choose for the following objects of subtype S: 
46
47
48
If S is indefinite, the meaning is implementation defined. The value of this attribute is of the type universal_integer. The Size of an object is at least as large as that of its subtype, unless the object's Size is determined by a Size clause, a component_clause, or a Component_Size clause. Size may be specified for first subtypes via an attribute_definition_clause; the expression of such a clause shall be static and its value nonnegative.

Implementation Requirements

49
In an implementation, Boolean'Size shall be 1. 

Implementation Advice

50/2
 If the Size of a subtype allows for efficient independent addressability (see 9.10) on the target architecture, then the Size of the following objects of the subtype should equal the Size of the subtype: 
51
52
53
A Size clause on a composite subtype should not affect the internal layout of components. 
54
The recommended level of support for the Size attribute of subtypes is: 
55
56
56.1/2
56.2/2
56.3/2
NOTES
57
5  Size is a subtype-specific attribute.
58
6  A component_clause or Component_Size clause can override a specified Size. A pragma Pack cannot. 

Static Semantics

59/1
 For a prefix T that denotes a task object (after any implicit dereference): 
60
T'Storage_Size

Denotes the number of storage elements reserved for the task. The value of this attribute is of the type universal_integer. The Storage_Size includes the size of the task's stack, if any. The language does not specify whether or not it includes other storage associated with the task (such as the “task control block” used by some implementations.) If a pragma Storage_Size is given, the value of the Storage_Size attribute is at least the value specified in the pragma.
61
A pragma Storage_Size specifies the amount of storage to be reserved for the execution of a task. 

Syntax

62
The form of a pragma Storage_Size is as follows: 
63
  pragma Storage_Size(expression);
64
A pragma Storage_Size is allowed only immediately within a task_definition.

Name Resolution Rules

65
The expression of a pragma Storage_Size is expected to be of any integer type. 

Dynamic Semantics

66
A pragma Storage_Size is elaborated when an object of the type defined by the immediately enclosing task_definition is created. For the elaboration of a pragma Storage_Size, the expression is evaluated; the Storage_Size attribute of the newly created task object is at least the value of the expression.
67
At the point of task object creation, or upon task activation, Storage_Error is raised if there is insufficient free storage to accommodate the requested Storage_Size. 

Static Semantics

68/1
 For a prefix X that denotes an array subtype or array object (after any implicit dereference):
69
X'Component_Size

Denotes the size in bits of components of the type of X. The value of this attribute is of type universal_integer.
70
Component_Size may be specified for array types via an attribute_definition_clause; the expression of such a clause shall be static, and its value nonnegative.

Implementation Advice

71
The recommended level of support for the Component_Size attribute is: 
72
73

Static Semantics

73.1/1
   The following operational attribute is defined: External_Tag.
74/1
 For every subtype S of a tagged type T (specific or class-wide):
75/1
 S'External_Tag

S'External_Tag denotes an external string representation for S'Tag; it is of the predefined type String. External_Tag may be specified for a specific tagged type via an attribute_definition_clause; the expression of such a clause shall be static. The default external tag representation is implementation defined. See 3.9.2 and 13.13.2. The value of External_Tag is never inherited; the default value is always used unless a new value is directly specified for a type. 

Implementation Requirements

76
In an implementation, the default external tag for each specific tagged type declared in a partition shall be distinct, so long as the type is declared outside an instance of a generic body. If the compilation unit in which a given tagged type is declared, and all compilation units on which it semantically depends, are the same in two different partitions, then the external tag for the type shall be the same in the two partitions. What it means for a compilation unit to be the same in two different partitions is implementation defined. At a minimum, if the compilation unit is not recompiled between building the two different partitions that include it, the compilation unit is considered the same in the two partitions. 
NOTES
77/2
7  The following language-defined attributes are specifiable, at least for some of the kinds of entities to which they apply: Address, Alignment, Bit_Order, Component_Size, External_Tag, Input, Machine_Radix, Output, Read, Size, Small, Storage_Pool, Storage_Size, Stream_Size, and Write.
78
8  It follows from the general rules in 13.1 that if one writes “for X'Size use Y;” then the X'Size attribute_reference will return Y (assuming the implementation allows the Size clause). The same is true for all of the specifiable attributes except Storage_Size.

Examples

79
Examples of attribute definition clauses: 
80
Byte : constant := 8;
Page : constant := 2**12;
81
type Medium is range 0 .. 65_000;
for Medium'Size use 2*Byte;
for Medium'Alignment use 2;
Device_Register : Medium;
for Device_Register'Size use Medium'Size;
for Device_Register'Address use System.Storage_Elements.To_Address(16#FFFF_0020#);
82
type Short is delta 0.01 range -100.0 .. 100.0;
for Short'Size use 15;
83
for Car_Name'Storage_Size use -- specify access type's storage pool size
        2000*((Car'Size/System.Storage_Unit) +1); -- approximately 2000 cars
84/2
function My_Input(Stream : not null access Ada.Streams.Root_Stream_Type'Class)
  return T;
for T'Input use My_Input; -- see 13.13.2
NOTES
85
9  Notes on the examples: In the Size clause for Short, fifteen bits is the minimum necessary, since the type definition requires Short'Small <= 2**(–7). 

Contents   Index   References   Search   Previous   Next 
Ada-Europe Sponsored by Ada-Europe